Water leaks are detected without breaking using thermal cameras, acoustic listening devices, ultrasonic detectors, and camera robotic systems. Thermal camera shows moisture and temperature difference behind the wall. Acoustic devices listen to water flow sounds. With these methods, the leak point is found with 98% accuracy and repaired with minimal intervention.
Was this answer helpful?
Yes. Thermal cameras can sensitively detect water leakage location by sensing 0.1°C temperature difference. Heat change and moisture occur where there is a leak, and the thermal camera shows this in different colors on the screen. Even hidden leaks under walls, ceilings, and floors can be found with thermal camera. It provides the advantage of detection without breaking.
Was this answer helpful?
With thermal camera and acoustic devices, the location of water leakage is detected within an average of 1-2 hours. For easily accessible points, this time can go down to 30 minutes. It varies according to the size of the house or building. Repair time after detection takes 1-4 hours depending on the location of the leak. It is completed on the same day.
Was this answer helpful?
Faucet dripping is usually caused by seal wear, loose faucet head, cartridge failure, or high water pressure. Most problems are solved with seal replacement. Mixer faucets may need cartridge replacement. If the internal mechanism of battery faucets is broken, complete replacement is required. A dripping faucet causes water waste and high bills.
Was this answer helpful?
Yes. High pressure of mains water (above 4 bar) damages faucets, mixers, washing machine and dishwasher valves. The risk of pipe leakage increases. Pressure should be reduced to 2.5-3 bar with a pressure regulator (reducer). High pressure shortens the life of appliances and increases water consumption. A pressure reducer should be installed at the building entrance.
Türkçe 
English 
Deutsch 
Русский